Round shank chisel b47k22h for soilmec rock drill auger for pile foundation work

Round shank chisel b47k22h for soilmec rock drill bucket for pile foundation work

Round shank chisel b47k22h for soilmec core barrel for pile foundation work

Round shank chisel b47k22h for bauer-bg rock drill bucket for pile foundation work

Round shank chisel b47k22h for liebherr-lb core barrel for bored pile foundation work

The B47K22H is a heavy-duty round shank chisel (bullet tooth) with a 38/30mm step shank and a 22mm tungsten carbide tip, engineered primarily for rotary drilling rigs, rock augers, core barrels, and drilling buckets in deep foundation bored piling.

When selecting or specifying B47K22H picks for a project, evaluate the following technical criteria:

1. Ground Conditions & Unconfined Compressive Strength (UCS)

Target Rock Hardness: B47K22H is best suited for soft to medium-hard rock and strongly-to-moderately weathered formations (typically 20 MPa to 100 MPa, such as weathered granite, sandstone, limestone, mudstone, and shale).

Carbide Tip Selection:

Abrasive Formations (Sandstone, Siltstone, Gravel): Choose coarse-grain tungsten carbide grades  for maximum abrasion resistance.

High-Impact Formations (Intermittent Boulders, Weathered Granite): Opt for carbide grades with slightly higher Cobalt content to increase impact toughness and prevent micro-chipping or head fracturing.

2. Steel Body Material & Heat Treatment

Steel Grade: Ensure the tool body is hot-forged from high-grade alloy steel such as 42CrMo or 40Cr /. Avoid cast or low-alloy bodies that can snap under high drilling torque.

Hardness Profile:

Body Hardness: Look for heat-treated bodies with 40–44 HRC toughness. This prevents shank bending or socket mushrooming while maintaining impact absorption.

Carbide Hardness: Should be 88–92 HRA (or >50 HRC equivalent) for wear resistance.

3. Anti-Wear Protection (Hardfacing / Skirt Strips)

Standard Body: Suitable for non-abrasive clay, marl, or cohesive soils.

Hardfaced Body (Anti-Wear Weld Overlay): For abrasive ground containing quartz sand, pebbles, or decomposed rock, choose B47K22H variants featuring tungsten carbide hardfacing strips or ring welds around the head/skirt. Hardfacing prevents "body wash" (where abrasive slurry wears away the steel holding the carbide tip before the tip itself wears out).

4. Holder Compatibility & Free Rotation Holder Fit: Ensure compatibility with standard 38mm / B47 series tool holders (such as B43H, B85, or C30 holders).

Retainer Clip: Check that the retaining ring/sleeve provides adequate tension to hold the tooth securely during withdrawal while allowing 360° free rotation during operation.

Self-Sharpening Effect: Bullet teeth must rotate inside their holders as they cut. Free rotation ensures symmetrical conical wear; if slurry locks the shank in the holder, flat spots will form and destroy the tooth rapidly.

5. Brazing Quality

Induction Brazing: High-quality B47K22H teeth utilize automated silver-copper induction brazing between the tungsten carbide insert and the steel pocket. Ensure there are no voids in the braze seam, which could cause tip loss under shear stress.

Quick Reference Matrix

Tianjin huachang xingye technology co ltd tjdrilling round shank chisel

Mexico  round shank chisel B47K19H ,B47K22H,canada/Vancouver /Calgary toronto /Ottawa round shank chisel B47K19H ,B47K22H colombia Medellín,Cartagena,Barranquilla,Tunja  round shank chisel B47K19H ,B47K22H,Vietnam/Hà  Phòng/Thành Chí Minh  round shank chisel B47K19H ,B47K22H,New Zealand/Auckland Australia Adelaide/Melbourne/Sydney/Brisbane  round shank chisel B47K19H ,B47K22H thailand round shank chisel B47K19H ,B47K22H,Malaysia /Singapore Indonesia/Jakarta/Pilipines Россия/russia  round shank chisel B47K19H ,B47K22H,belize/Puerto Rico/Guatemala/San salvador/Honduras round shank chisel B47K19H ,B47K22H,Ecuador Peru lima ,callao/Bolivia Chile Santiago de Chile Argentina/Uruguay/Paraguay,Brasil/Guyana  round shank chisel B47K19H ,B47K22H ,usa ,america los Angeles/new york/California  round shank chisel B47K19H ,B47K22H,South Africa Kazakhstan double cut rock bucket , spain Português germany italy ,greece romania serbia,france  round shank chisel B47K19H ,B47K22H south africa  round shank chisel B47K19H ,B47K22H,south korea  round shank chisel B47K19H ,B47K22H, japan  round shank chisel B47K19H ,B47K22H , taiwan , hong kong  round shank chisel B47K19H ,B47K22H round shank chisel B47K19H ,B47K22H